Generator Installation
A good generator installed badly will overheat, trip, rust out early or, worst of all, be unsafe. Our generator installation service covers everything from home backup units to large industrial sets, anywhere in South Africa. That means a site assessment first, a correct and compliant electrical connection, a proper load test, and a Certificate of Compliance at the end.

What our generator installation covers
- Site assessment: confirming the size against your real load, checking your supply (single or three phase) and your distribution board, and choosing the right spot.
- Placement and base: firm, level ground for small units, a concrete plinth for larger sets, with room for airflow and servicing.
- Delivery and offloading, including crane offloading for heavy generators.
- Electrical connection: correctly sized cabling, earthing and protection, through a manual changeover switch or an automatic transfer switch.
- Essential-load boards, where only some circuits should run on the generator.
- Commissioning: first start, electrical checks, a changeover test and a test under load.
- Handover: the Certificate of Compliance, a walk-through of how to use it, and the service schedule.
Homes, businesses and industrial sites
A home installation is usually straightforward: a changeover or ATS, a short cable run and a solid base. Commercial and industrial generator installation is a project in its own right, with plinth design, heavier cabling, switchgear, exhaust routing and fuel planning. We handle both.
Want to understand the process first?
Our generator installation guide walks through every step from site visit to switch-on, and our article on installation requirements in South Africa explains the rules, including why the changeover switch and Certificate of Compliance matter.
To discuss an installation, call or WhatsApp +27 68 878 5922, or request a quote. See all our generator services.
How long does generator installation take?
A straightforward home installation is often finished in a day. Commercial installations take longer, mainly because a concrete plinth needs time to cure, a crane may need to be booked, or the main board needs changes. Large industrial sets are planned as a project over several weeks. We give you a realistic timeline with your quote.
What affects the cost of installation
- Distance from the generator to your distribution board, which sets the cable length and thickness.
- Manual changeover or ATS, and the switch’s rating.
- Board work, such as splitting essential circuits onto their own board.
- The base: paving for small units, an engineered plinth for big ones.
- Access, including whether a crane or forklift is needed.
We quote installation as its own line, so you can see exactly what you’re paying for. Choosing a size first? See our sizing guide.
Our generator installation process, step by step
- 1. Sizing and site assessment. We work out the right generator from your load list or electricity bill, and check the site from photos or a visit.
- 2. A written quote. The generator, delivery, installation and the transfer switch as separate lines, with prices excluding and including VAT.
- 3. Preparation. A level concrete base or plinth, cable routes, and the position for airflow, exhaust and noise.
- 4. Delivery and placement by our own team, including crane offloading for larger sets.
- 5. Electrical connection. Cabling, earthing, protection and a changeover or automatic transfer switch, done by a registered electrician.
- 6. Commissioning and testing. We run it under load, test the switchover both ways and, for larger sites, do a load bank test.
- 7. Certificate of Compliance and handover. We show you how it works and what to check.
Generator supply and installation in one package
Most customers buy the generator and the installation from us together. One supplier, one team and one point of contact means nothing falls between the cracks: the generator is the right size for the switch, the switch is right for the board, and the paperwork is complete. If you already have a generator, we’ll quote for installation only.
Generator installation across South Africa
Our own team installs generators nationwide, including Johannesburg, Pretoria, Cape Town, Bloemfontein, Gqeberha and East London, George, Polokwane, Mbombela and Rustenburg, as well as generator installations in KZN, in Durban and Pietermaritzburg.
Why have us install your generator
- Our own team, not subcontractors, from delivery to commissioning.
- Done to the rules, with a Certificate of Compliance; see generator installation requirements.
- Sized properly first, so the generator, switch and cables all match your load.
- Aftercare, with servicing, repairs and remote monitoring.
Frequently asked questions
Do you install generators you didn’t supply?
Tell us the make, model and size, and we’ll confirm what’s needed.
Will I get a Certificate of Compliance?
Yes. Connecting a generator to your wiring is electrical installation work, and it’s certified at handover.
Do you install nationwide?
Yes. We’re based in Bloemfontein and install across South Africa.
How long does installation take?
A home installation is often done in a day; commercial and industrial jobs take longer.
Do you install generators you didn’t supply?
Yes. We quote for installation only, including the transfer switch and Certificate of Compliance.
Do you do generator installations in KZN?
Yes, including Durban, Pietermaritzburg and the Midlands, with our own team.
Not sure which size you need?
Tell us what you want to power and where. We will recommend the right generator and send you a written quote.