Meet the 250kVA Pramac generator. The GSW250P is a full industrial generator built around a six-cylinder, 8.8-litre Perkins 1506A engine with an electronic governor and 24V starting system. It feeds a Mecc Alte ECO38 alternator with digital voltage regulation, and sits in a galvanised, soundproofed canopy with a 636-litre tank.
It suits large commercial buildings, hospitals, data centres, mines, water treatment works and factories with a three-phase supply.
What it will run
It delivers 186.7kW prime and 200kW standby, about 62kW per phase at prime rating. With a prime rating, it’s suited to long daily running as well as outage backup.
Fuel use
Pramac publishes 34.6 litres an hour at 75% load and 45.4 litres at full prime load. With 636 litres on board, it can run through most outages on its own tank.
Easy to service
Wide side doors on stainless steel hinges give technicians good access, and Perkins parts and expertise are widely available in South Africa.
Specifications
| Model | Pramac GSW250P |
| Phase | Three phase, 400V, 50Hz, 0.8 power factor |
| Standby power | 250kVA / 200kW |
| Prime power | 233.3kVA / 186.7kW |
| Engine | Perkins 1506A-E88TAG2, 6 cylinder in-line, 8.8 litre, turbocharged |
| Governor | Electronic |
| Starting system | Electric, 24V |
| Alternator | Mecc Alte ECO38-3SN/4, brushless, DSR digital AVR, class H |
| Fuel tank | 636 litres |
| Fuel use | 34.6 L/h at 75% load, 45.4 L/h at 100% prime load |
| Oil capacity | 41 litres |
| Noise level | 68dB(A) at 7m |
| Canopy | Galvanised steel, soundproofed, weatherproof |
| Weight | 2,950kg (dry) |
| Dimensions (L x W x H) | 3951 x 1438 x 2085mm |
Installation and commissioning
An industrial generator is a project, not just a delivery. It needs an engineered plinth, correctly rated cabling to the main switchboard, an automatic transfer switch sized for your supply, and a plan for fuel delivery and exhaust. The installation must be carried out by a registered electrician and signed off with a Certificate of Compliance. We handle the site assessment, delivery, crane offloading, installation, load testing and handover. Read our installation guide for an overview.
Powered by a Perkins engine; see our Perkins generators page. Part of our Pramac range: see all Pramac generators for sale, from 65kVA to 330kVA.
See our 250kVA generator guide, comparing the Pramac GSW250P and the Cummins C275D5.
Common questions
Why Perkins?
Perkins engines power industrial equipment worldwide, so parts and trained technicians are easy to find in South Africa.
What sizes are nearby?
The 200kVA Cat below it, and the 275kVA Cummins above. See the full industrial range.