25kVA 3 Phase Generator: Hyundai vs Cummins, Specs and Prices
Looking for a 25kVA 3 phase generator? We have two, and they suit different buyers. The Hyundai DHY28KSE delivers 25kVA continuously on three phase, at a price that’s hard to beat. The Cummins C28D5 is prime-rated at 25kVA, built to run all day, every day, with a Stamford alternator and a big 165-litre tank. Both carry a “28kVA” name because that’s their maximum output; for planning, 25kVA is the figure that matters.

Our 25kVA 3 phase generators side by side
| Hyundai DHY28KSE | Cummins C28D5 | |
|---|---|---|
| Continuous rating | 25kVA / 20kW | 25kVA / 19.8kW prime |
| Maximum or standby | 28kVA / 22kW | 28kVA / 22kW standby |
| Phase | Three phase, 400V / 230V | Three phase, 380 to 415V |
| Engine | Hyundai 4 cylinder, 1500rpm | Cummins X2.5-G2, 1500rpm |
| Alternator | Hyundai, with AVR | Stamford S0L2-P1 |
| Fuel tank | 93 litres | 165 litres |
| Fuel use | Varies with load | 6 litres an hour at full load |
| Noise | 65dB(A) at 7m | 77dB(A) at 1m |
| Weight | 870kg | 1,014kg |
| Price | R60,500 excl. VAT / R69,575 incl. VAT | R84,500 excl. VAT / R97,175 incl. VAT |

Which 25kVA 3 phase generator should you choose?
- Choose the Hyundai for standby power during outages at the best price. It’s quieter, lighter, has AVR, electric and remote start, and an ATS connection.
- Choose the Cummins if the generator will run long hours every day, or if you’re off the grid. Its prime rating, Stamford alternator and 165-litre tank (about 27 hours at full load) are built for heavy duty, and Cummins parts and service are easy to find in South Africa.
What a 25kVA 3 phase generator can run
A 25kVA three-phase generator gives about 20kW in total, roughly 6.7kW on each phase. Three-phase motors draw evenly from all three phases; single-phase loads like lights and sockets are spread across the phases by your electrician. Typical uses:
| Site | What a 25kVA covers |
|---|---|
| Farm | A three-phase borehole or irrigation pump, a cold room and the farmhouse |
| Workshop or fabrication shop | Welders, compressors and grinders used a few at a time, plus lights |
| Small factory | A small production line and the office |
| Shop or restaurant (three-phase supply) | Fridges, extraction, lighting, tills and aircons |

Installation: the ATS and the phases
At 400V, a 25 to 28kVA generator carries about 36 to 40 amps per phase, so it’s usually paired with a 40A or 63A 4-pole automatic transfer switch. The most important job for your electrician is balancing the loads across the three phases, because one overloaded phase will trip even when the generator has plenty of capacity in total. Both generators need a level base, room for airflow and a Certificate of Compliance; we handle the full installation.
Not sure you need three phase?
If your property is single phase, which nearly all houses are, a three-phase generator gives each circuit only a third of its power. Our 25kVA single-phase Hyundai puts the full 25kW on your circuits instead; see our 25kVA generator guide. To check your supply, look at the main switch on your distribution board: a wide, three-pole breaker means three phase. Our 3 phase generators guide explains more.
Need a little less or more?
For less three-phase power, the 22kVA Hyundai (R48,900 excl. VAT / R56,235 incl. VAT) or the quiet 20kVA Himoinsa. For more, the 35kVA Hyundai. Get a quote, or send us your load list and we’ll size it for free.
For prices of every option, see our 25kVA generator price guide.
Shopping by the maximum rating? See our 28kVA generator comparison: Hyundai vs Cummins.
Frequently asked questions
How much is a 25kVA 3 phase generator?
Our Hyundai DHY28KSE is R60,500 excl. VAT / R69,575 incl. VAT, and the Cummins C28D5 is R84,500 excl. VAT / R97,175 incl. VAT.
Why is it called a 28kVA if it’s 25kVA?
28kVA is the maximum (or standby) output. The continuous or prime rating, 25kVA, is the one to plan around.
How many amps is a 25kVA 3 phase generator?
About 36 amps per phase at 400V, rising to about 40 amps at its 28kVA maximum.
Can a 25kVA 3 phase generator run single-phase appliances?
Yes, from each phase, as long as the loads are balanced across the three phases.